Skip to main content

Thermal Energy Particle Motion Experiment

Profile picture for user PocketLab
Submitted by PocketLab on Sat, 02/09/2019 - 00:28

How does adding thermal energy affect the particle motion of a gas? 

NGSS Alignment: MS-PS3-4

The disciplinary core idea behind this standard is PS3.A: Definitions of Energy and PS3.B: Conservation fo Energy and Energy Transfer. In PS3 the standard specifically looks at how temperature is a measure of the average kinetic energy of the particles of matter. This leads to the conclusion that the temperature and the total energy of a system depend on the type, states, and the amounts of matter present. In PS3.B, it specifically looks at how the amount of energy needed to change the temperature of a sample of matter depends on the nature of the matter, the size of the sample and the environment. The setup of this lab provides a unique way to investigate this standard by gathering data on the energy of a sample of matter both with a direct measure of temperature and an indirect measurement of the movement of the particles (kinetic energy) using a barometric pressure sensor. By placing a PocketLab Voyager or Weather with a PocketLab attachable temperature probe inside a mason jar, temperature and pressure can be simultaneously measured. By adding thermal energy with a heat lamp, the particles get more excited and move around more quickly, creating additional pressure inside the jar, measured by PocketLab's barometric pressure sensor. The attachable temperature probe will also directly measure the changing temperature inside the jar. This is a great example of the specific parts of PS3.A under this standard. Students can then use the Science and Engineering Practice, Planning and Carrying out an Investigation, to examine the specific pars of PS3.B in this standard. Students can find ways to amount of matter in the jar, by either trying a different size jar or by trying to remove air from the jar. They can also change the material holding the matter (e.g. change the jar to a plastic container). In their investigation, students would see compare how these changes would affect the energy transfer measured by the Pocketlab. 

MS-PS3-4: Plan an investigation to determine the relationships among the energy transferred the type of matter, the mass, and the change in the average kinetic energy of the particles as measured by the temperature of the sample. 

The standard is broken down into the three NGSS pillars below:
Science and Engineering Practices - Planning and Carrying Out Investigations
Disciplinary Core Ideas - PS3.A Definitions of Energy and PS3.B: Conservation fo Energy and Energy Transfer
Crosscutting Concepts - Scale, Proportion, and Quantity 

Thermal Energy Examples

Matter makes up everything around us. The air we breathe, the water we drink, the chair we are sitting on, the cells in our body, it is all made up of matter. Matter can exist in different states: Take water for example, it can exist as a solid (an ice cube), liquid (water in a cup for drinking), and gas  (vapor rising from a boiling pot of water). In all three states, water is always made of the same molecules, H20, and the difference is the amount of thermal energy. Water is a good example of these three states because it can easily transition between them with relatively small changes in thermal energy. 

What is temperature

Temperature can be described as a measurement of the average kinetic energy in the matter in a substance. Kinetic energy is energy from motion. Matter that is moving around slowly has less kinetic energy. Matter that is moving around more quickly has greater kinetic energy. By measuring temperature, you can understand how much kinetic energy a substance has. 

Three types of thermal energy transfer:

The three types of thermal energy transfer are conduction, convection and radiation. Conduction involves direct contact of atoms, convection involves the movement of warm particles and radiation involves the movement of electromagnetic waves. In our experiment, we will use the radiation from a heat lamp.

Pressure of a gas:

In a sealed container, the pressure of the gas is the amount of force that the particles in the gas are pushing out on the container.

Objective - Develop a Model for Thermal Energy Transfer 

Students will be able to: 

  1. Develop a model that predicts how adding thermal energy will affect the motion of the matter in a substance.  
  2. Provide evidence for that model by collecting data on particle motion using PocketLab’s barometric pressure sensor. 
  3. Use the model to answer the investigation question and predict the relative kinetic energy in a substance when it is a solid, liquid, or gas. 

Thermal Energy Investigation Questions

Your investigation will answer the following questions: 

  1. In a sealed container, how are the temperature of a gas and the pressure of that gas related? 
  2. How does adding thermal energy affect the particle motion of a gas?


What do you predict the answers to the Investigation Questions will be? Explain using your own prior knowledge or information from the Background Information section. 


Thermal energy affecting particle motion - lab set up.


Before beginning the activity, make sure to wear safety goggles, and follow all safety precautions instructed by your teacher. The heat source (heat lamp or bunsen burner) can get very hot and cause injury or fires. 

Procedure: Plan Your Investigation

  • Connect your PocketLab to PocketLab mobile app or the PocketLab web app. 
  • Place the PocketLab in the canning jar and seal the jar. 

Your procedure will need a step-by-step guide of how your group will answer the Investigation Questions. 
In your procedure, be sure to answer the following questions: 

  • What type of PocketLab data do you need to collect to develop your model? (Remember you can view two graphs at the same time). 
  • What is the independent variable, what is the dependent variable, and what are the control variables in your investigation? 
  • How will the independent variable be changed and how will the dependent variable be measured? 
  • How will the Data Analysis tools in the PocketLab App help in analyzing the results of each trial? 
  • How many Runs and Trials are needed to answer the Investigation Question? 
  • How will you visualize your data for analysis (table, graph, etc.)? 

Data Analysis Tools 

To use the Data Analysis tools in the PocketLab Web App, on a recorded data trial, highlight the portion of the graph that you are interested in by clicking and dragging with your mouse. Next, click the Data Analysis button. You should see basic statistics on the portion of the graph you’re viewing as well as the ability to add curve fits. 

Data Analysis Part 1

Follow your procedure for analyzing the results of each Trial and Run then answer the following questions: 

  • What did the collected data tell you about the Investigation Question? 
  • How did use the Data Analysis Tools and your data visualization help you determine the answer to the above question? 

Data Analysis Part 2: Develop a Thermal Energy Transfer Model

Pick 5 temperature and pressure readings at different times during your trial. Draw a diagram that modes the particle motion of the gas in the container at each of those different points. Be sure your model illustrates how the kinetic energy of the particles is affecting by the different levels of thermal energy. 

Develop a Model Extension
Describe how you could predict the change in pressure in a gas (of normal atmosphere) if the temperature changes by x degrees. Use the data you collected in your investigation to create your model. 

HINT: To create your model, try graphing data from your pressure readings against data from your temperature readings. (You don’t need to graph every data point. Use data points that are evenly spaced out during the course of your trial). What do you notice? Can you fit a line to that data? What is the equation for that line? How would that help you Develop a Model? 


Were your hypotheses valid or invalid? How are the temperature of a gas and the pressure of that gas related? How does adding thermal energy affect the particle motion of a gas? 

How do your analysis of the collected data and the model you developed support your claim? 

Justification of Evidence
What scientific concepts or principles can explain the evidence? 

Further Discussion

Predict: How does the kinetic energy of the molecules in a substance relate to the state of that substance (solid, liquid, or gas)? Even though you only investigated the particle motion of a gas, how does the data you collected support your answer? 


Measuring change in pressure when thermal energy is added.
Grade Level

To access this free lesson, please sign up to receive communications from us: